Hi Temp 300.
[Runs on Figure 4 DLP]
Ultra High Temp
High Thermal-Resistance, Translucent Amber Plastic for Flow Visualization (HDT >300 °C)
Figure 4® HI TEMP 300-AMB is an ultra-high temperature plastic for use in applications requiring high heat resistance. With heat deflection temperature of over 300 °C at both low and high stress (HDT at 0.455 and 1.82 MPa), this material is well suited for the testing of high temperature components in applications including HVAC, consumer appliances, motor enclosures, stators, molds and the like. It does not require a secondary thermal post-cure.
Applications
High temperature components testing, and general use parts including: HVAC, consumer appliances, motor enclosures, stators, etc.
Low pressure molding/tooling: expanding foams, rubbers, etc.
Overmolding
Benefits
Production-grade material
High heat resistance for testing and use in high heat environments
No secondary thermal post-cure required
Excellent visualization for parts requiring evaluation of internal features and fluid flow performance
DOwnload data sheet >>>>
Features
HDT over 300 °C at both low and high stress (HDT at 0.455 and 1.82 MPa)
Rigid and translucent
High tensile modulus for use in molds (4000 MPa)
READY TO print WITH
hi temp 300?
Need rigid DLP parts for demanding high temperature applications? Upload your model for a quote or speak with our team about operating conditions, quantities, tolerances and finishing requirements.